How to fix Fgtech FW0475 Cant Start on Windows XP

FGTech V54 0475 is one of the popular ECU Programmer For flashing ECU via OBDII and BDM. FGTech 0475 Galletto V54 has a good reputation for its costive price,effective and stable performance, multi vehicles supported and online operation as well as no tokens limited. 

Fgtech 0475 ECU Programmer has been tested by many tuners,100% workable,but today, when i hang around forums,i noticed that a members met the problem " Fgtech V54 FW0475 Can’t Start After Installed On Windows XP ",well,for this problem,pls dont worry,it was not the product itself fault, and you can just follow these steps to fix your problem well.

First,do a fresh install of windows XP

Second,remove the old fgtech galletto V54 from system totally.That is, you need to remove all previous installs system files of fgtech.

Third,check your galletto fgtech drive, check if all is well, there’s driver for 32bit and 64bit. (if you uninstall all previous versions). Use the USB fix that comes on the cd.

If Galletto Fgtech v54 not open in OBD2, re–install again without deinstalar the Galletto v54. and try to open the obd2 again.Fourth,check ftd2xx.dll file. If this file was read only and you have to change this unmarking read only in location – widows/system32/ftd2xx.dll.Now is working !

Hope this method will help you fix your problem,if still cant fix,you can buy a new one from autocardiag.com, autocardiag fgtech 0475 works well

Autocardiag.com Fgtech 0475 Striking Features

1.Newest generation,with new better technology supporting.
2.0475 FGTech has been tested on cars & trucks before sending out.
3.For all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum.
4. Multi-Languages supported.
5.Online operation supported,no tokens limited.
6.developed with high-speed USB2 technology.
7.Can read and write ECU both via OBD II and BDM